Originally approved in Last previous edition approved in as B – 2 For referenced ASTM standards, visit the ASTM website. ASTM B(). Standard Specification for Titanium and Titanium Alloy Castings. standard by ASTM International, 11/01/ View all product details. ASTM B Standard Specification for Titanium and Titanium Alloy Castings.
|Published (Last):||3 November 2008|
|PDF File Size:||10.89 Mb|
|ePub File Size:||16.93 Mb|
|Price:||Free* [*Free Regsitration Required]|
Originally published as B — 61 T.
The results shall conform to the requirements speci? Workmanship, Finish, and Appearance 8. If a casting is used for a hardness sample, indentations shall be made in a surface that will not be subsequently machined. The chemical composition determined shall conform to the analysis in Table 1 within the aztm analysis variations shown in Table 2 or shall be subject to rejection by the purchaser.
Properties shall be determined in the as-cast condition unless otherwise speci? The materials shall undergo chemical, pour, and product analysis to determine the chemical composition which shall conform to the requirements for nitrogen, carbon, hydrogen, iron, oxygen, aluminum, vanadium, tin, ruthenium, palladium, cobalt, molybdenum, chromium, nickel, niobium, zirconium, silicon, and titanium.
ASTM B – 09 Standard Specification for Titanium and Titanium Alloy Castings
ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date. Your comments are invited either for revision of this standard or for additional standards and should be addressed to ASTM Headquarters. The frequency of the retest will double the initial number asttm tests. If the pattern is supplied by the purchaser, the dimensions of the casting shall be as predicted by the pattern. A number in parentheses indicates the year of last reapproval.
Product analysis limits shall be as speci? Tensile properties shall be determined using a strain rate of 0.
ASTM B367 GB / T 15073 Titàn Graphite Ponp Distribisyon pou Vann
The decision for stress relieving shall be made by the producer, unless otherwise agreed upon. Examination of Weld Preparation S3. A superscript epsilon e indicates an editorial change since the last revision or reapproval.
Therefore product analysis for elements not listed in Table 1 shall not be required unless speci? Inspection procedure shall be in accordance with the Guide E 94 and Method E Hardness shall be determined in the as-cast condition unless otherwise speci?
By agreement between producer and purchaser, analysis may be required and limits established for elements or compounds not speci? When discontinuities exceed the acceptance limits, all castings in the lot shall be examined according to Category II. Small size castings may be such that marking must be limited consistent with the available area.
The stressrelief cycle shall be in accordance with 7. Materials for this specification shall be melted by conventional processes used for reactive metals such as consumable electrode and induction-slag, plasma arc, induction-skull, and electron beam melting processes.
Hardness values reported shall be representative of the base metal of the castings and not b637 any surface contamination due to mold-metal interactions. Repair by Welding 9. Current edition approved Aug.
ASTM B367 GB / T 15073 Distribisyon Titàn Ponp pou Chimik
Referenced Documents purchase wstm The documents listed below are referenced within the subject standard but are not provided as part of the standard. This is in accordance with the round-off method of Practice E The values given in parentheses are for information only.
Details of the supplementary requirements shall be agreed upon by the producer and purchaser. The stress-relief cycle shall be in accordance with 7. The surface of the castings shall be free of adhering mold material, scale, cracks, and hot tears as determined by visual inspection.
China Titanium Investment Casting Pump Casing ASTM B – China Pump, Pump Casing
The producer shall not ship material which is outside the limits speci? The producer shall maintain documentation on procedure and welder quali? The values given in parentheses are mathematical conversions to SI units that are provided for information only and are b637 considered standard. Liquid Penetrant Examination S2.
Unalloyed titanium plus 0. Temperature, time at temperature, and atmosphere shall be as agreed upon between the producer and the purchaser.